When it comes to the most cost-effective way for tool holding, the first thing that comes to our minds is ER collets. This is possibly the most effective CNC Router Tool holding system. Here we will help you understand how to fit a CNC router tool into a collet correctly. Before you hop onto the fixation method, do not forget to get the right collet such as 5c Collet, r8 Collet etc.
While fitting a CNC router tool into a collet, you must get the right size and type of collet. So now, let’s see how you can correctly fit a CNC router tool into a collet.
How To Correctly Fit A CNC Router Tool Into A ER Collet?
To correctly fit a CNC router tool into a collet, consider the following steps:
- First and foremost, get the right size, type, and shape of the collet for the CNC router too. Push the collet into the lock nut until it clicks into position.
- Ensure that the collet is successfully engaged with the locking ring of the nut. To get double sure about it, you may insert it at a slight angle.
- Now, screw the nut loosely onto the CNC router tool holder cone.
- As the next step, put the tool and insert it into a collet; ensure that the tool fills at least 75%-80% of the collet bore. During this process, do not let the cutting flute get into the collet.
- Now, screw again and tighten the collet to the right torque.
- Be extra careful while tightening the screw; also, make sure that you are not leaving it loose or over-tightening. In both cases, it will create trouble.
- Now, as the final step, carefully remove the tool from the collet. Unscrew the locknut from the collet and remove the tool out of the collet.
Importance Of Correctly Fitting CNC Router Tool Into The Collet
Collets are available in various shapes and sizes; each one has its purpose. You must choose the right collet to fit the CNC router tool. Choosing the wrong type or size and incorrectly fitting the CNC router into a collet can lead your workpiece or tool to numerous problems.
Wondering why we are emphasizing correctly fitting the CNC router tool into the ER Collet? Well! Take a look below to the few examples of what can go wrong if you misfit the CNC router tool:
- Poor quality cutting
- Premature tool failure
- Damage to the spindle
- Damage to the collet
- Damage to the tool
- Damage to the machine bed
- Misalignment of the tool
With this, you can easily fit the CNC router tool into a collet. So purchase your CNC router tool and collet from the leading Collet Manufacturer in India right now and fix it efficiently.
Our Other Products: